# Crossover - Turntable Through the Mother-32 Ladder Cases: **Synthrotek SeaHorse** + **Moog 4-tier**. Each physical module is used once. Source: original Jack labels from the Mother-32 Users Manual, the Labyrinth Manual, the Ginko Phono Preamp building manual and its ModularGrid listing, and the Ladik A-541 description on ModularGrid. Phono Preamp output silk-screen and Echo jacks: check panel. Signal path explained: [[Patches/Crossover/Crossover - Turntable Through the Mother-32 Ladder - SignalPath|SignalPath]] Incremental build: [[Patches/Crossover/Crossover - Turntable Through the Mother-32 Ladder - Build|Build]] ## Modules - Ginko Synthese Phono Preamp (SeaHorse): turntable in - Moog Mother-32 (Moog 4-tier): ladder filter, EG and VCA - Moog Labyrinth (Moog 4-tier): random rhythm and filter CV - Synthrotek Echo (SeaHorse): echo on the chopped side - Ladik A-541 (SeaHorse): stereo out **Cable colors:** [[Cable Colors]] after [Learning Modular](https://learningmodular.com/choosing-patch-cables/): ⚪ Gray 1 V/oct · 🔵 Blue modulation · 🟡 Yellow audio · 🔴 Red gates/triggers · 🟢 Green clock/sync · ⚫ Black external ## Cables 1. ⚫ Black · Turntable RCA -> Phono Preamp RCA inputs 2. 🟡 Yellow · Phono Preamp MONO output (check panel) -> Mother-32 EXT. AUDIO (in) 3. 🔴 Red · Labyrinth SEQ1 TRIG (out, 0 to 5 V) -> Mother-32 GATE (in) 4. 🔵 Blue · Labyrinth SEQ2 CV (out) -> Mother-32 VCF CUTOFF (in) 5. 🟡 Yellow · Mother-32 VCA (out, gated) -> Echo audio input (check panel) 6. 🟡 Yellow · Echo output (check panel) -> A-541 channel A input (1/8″) 7. 🟡 Yellow · Mother-32 VCF (out, filtered but not gated) -> A-541 channel B input (1/8″) ## Starting points - **Phono Preamp:** PHONO for a turntable, LINE for a line source. Turn it up until the record sits level with the Mother-32 VCO at MIX 12 o'clock, then go fully CW on MIX. - **Mother-32:** - MIX fully CW (EXT only). VCF MODE LP. - CUTOFF 12 o'clock, RESONANCE 2 o'clock, so the filter rings on each cutoff jump. VCF MOD AMOUNT 0. - VCA MODE EG, ATTACK fully CCW, DECAY 11 o'clock, SUSTAIN OFF. - VOLUME 2 o'clock; it sets the VCA patch-out level. - **Labyrinth:** RUN, TEMPO to taste. Flip 5 bits on in SEQ1 for the chop rhythm. SEQ2 CV RANGE 11 o'clock, CORRUPT on SEQ2 at 11 o'clock. Its own VOLUME down. - **Echo:** Rate 12 o'clock, Feedback 1 o'clock, Mix 12 o'clock. ## Level notes - EXT. AUDIO is a unity-gain input built for 10 V p-p, and the manual warns that line-level sources come in weak. The Phono Preamp's modular-level output is what you want here, so don't skip it and plug a line source straight in. - The cases run on separate supplies. If you get hum when you join them, look at grounding before blaming the patch. ## What it should sound like The record sliced into resonant, gated Moog-filter stabs on a mutating Labyrinth rhythm, with an echo trail on the left. The right side is the same record through the same filter, ungated, as a continuous wash.